JVC GV-LS2W User Manual

Also see for GV-LS2: Specification sheet User guide Connection guide User guide User guide

Contents

19PreparationAdding a camera driver's userTo access to the unit using the camera driver ( ➭ page39), you need to set the user name and passwordbeforehand. (Up to four users can be registered.)Initial setting: USERNAME "root", PASSWORD"password".They should be changed as soon as possible forsecurity reasons.* Multiple users cannot view simultaneously.1 Select "MONITORING SETTINGS" in"NETWORK".If the sub settings are not displayed, click "+" on theleft of "NETWORK".2 Click the "ADD" button.• Select a user from "USER (JVC CAM driver)" andclick the "UPDATE" button to change the username and password of the user.• Select a user from "USER (JVC CAM driver)" andclick the "DELETE" button to delete the user.3 Enter "USERNAME", "PASSWORD", and"PASSWORD (CONFIRM)".Enter 1 to 32 characters for the user name, and 8 to32 characters for the password. (1 byte alphanumericcharacters and symbols only)4 Click the "SAVE" button.The user has been registered.