86 EN SUBSIDIARY SETTINGSSome DVD-RAM/RW discs are unformatted.Format the disc when you use an unformatted disc or you want todelete all recordings and data on the disc.Format A DVD-RAM Disc1 Press VCR/DVD repeatedly so that the DVD lamp lights up onthe unit.2 Press SET UP to access the Main Menu screen.3 Press rt w e to select “DVD SET UP”, then press ENTER.4 Press w e to select “UTILITY”,then press ENTER.5 Press rt to select “FORMAT”,then press ENTER. Press w e toselect “YES”, then press ENTERwhen “DISC WILL BEFORMATTED” appears on the TVscreen.6 Press w e to select “OK”, thenpress ENTER when “DISC FORMATTING WAS SELECTED”appears on the TV screen.Format A DVD-RW Disc1 Perform steps 2 to 4 of “Format A DVD-RAM Disc” on the abovebefore continuing.2 Press rt to select “FORMAT”, then press ENTER. Press w eto choose “VR MODE” or “VIDEO MODE”, then press ENTERwhen “DISC WILL BE FORMATTED” appears on the TV screen.“VR MODE”: To be chosen when you want to record, erase, oredit data on the disc repeatedly.“VIDEO MODE”: To be chosen when you want to erase all the dataon the disc once played back to record new data,or play back the disc on other DVD players.3 Press w e to select “YES”, then press ENTER when “DISCWILL BE FORMATTED IN VR MODE/VIDEO MODE” appears onthe TV screen.NOTES:● It is impossible to format Version 1.0 DVD-RW discs in Video mode.● It is impossible to format DVD-R discs.● All the programmes on a disc will be deleted once the disc isformatted even if they are protected titles. ( pg. 59)Format A Disc (DVD Deck Only)ATTENTION:● When a disc is formatted, all recordings and data are erased. It isimpossible to restore them.● Never turn off the unit or disconnect the mains power cord while“NOW FORMATTING...” is displayed on the TV screen.● Turn on the unit.● Turn on the TV and select the AV mode.● Slide the TV/CABLE/SAT/DVD switch to DVD.● Load a DVD-RAM/RW disc to format.1472580369ENTERSET UPrtw eVCR/DVD SATDownloaded From DvDPlayer-Manual.com JVC Manuals