JVC DR-MV1 Instructions Manual

Also see for DR-MV1: Instructions Instructions

Contents

54 EN OPERATIONS ON VCR DECKYou can programme this unit to timer-record as many as8 programmes.With the S HOW V IEW system, timer programming is greatlysimplified because each TV programme has a corresponding codenumber which your unit is able to recognize.You can use the remote control to enter the SHOWV IEW number.1 Load a cassette with the record safety tab intact.2 Press VCR/DVD repeatedly so that the VCR lamp lights up onthe unit.3 Press SHOWVIEW to access the S HOW V IEW screen.4 Press the number keys to enterthe S HOW V IEW number of aprogramme you wish to record, thenpress ENTER.● If you have made a mistake, pressCANCEL (&) and input the correctnumber before you press ENTER.● If the number you entered is invalid,“ERROR” appears on the TV screenand “Err” appears on the front displaypanel. Press CANCEL (&) and input a valid S HOW VIEW number.5 The SHOW V IEW number youentered and the matching timer-recording information are displayed onthe TV screen. Check the programmedata.● To cancel this setting, pressSHOWVIEW or PROG/CHECK.6 Press REC MODE to select the desired recording mode. Orpress w e to select “SP/EP”, then press rt to select the desiredrecording mode.7 Press the number keys to to set “VPS/PDC” to “ON” or “OFF”.8 Press ENTER to complete timer programming.● To programme another timer, repeat steps 3 – 8.● If “PROGRAM OVERLAP” appears on the TV screen, see page 56.9 Press VCR TIMER (#) to engage the unit’s timer mode. TheVCR timer lamp lights up on the unit and the DVD deck isautomatically selected. When the DVD deck is in timer standbymode, the unit is automatically turned off.● To disengage the timer mode, press VCR TIMER (#) again.NOTES:● To Timer-Record Weekly Or Daily Serials:— in step 5, press number key “9” for weekly serials or number key“8” for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY”appears on the TV screen. Pressing the button again makes thecorresponding indication disappear.● You can programme this unit to timer-record as many as 8programmes. If you try to programme the unit to record a ninth,“PROGRAMME FULL” appears on the TV screen and “FULL”appears on the front display panel. To record the extra programme,you must first cancel any unnecessary programmes. ( pg. 56)● To record the programmes received by satellite receiver, record onthe DVD discs. For details, refer to “SHOW VIEW®Timer Programming”( pg. 43).SHOW VIEW ®Timer Programming● Make sure that the unit’s built-in clock is set properly.● Turn on the unit.● Turn on the TV and select the AV mode.● Slide the TV/CABLE/SAT/DVD switch to DVD.IMPORTANT:Make sure the channel position number you wish to record isdisplayed; if not, see “SHOW VIEW®System Setup” ( pg. 82) and setthe Guide Programme number correctly.14725803690 – 9RETURNENTERSHOWVIEWCANCELVCR TIMER (#)VCR/DVDREC MODESATSHOWVIEW SYSTEMIMPORTANT:If you have moved to a different area or if a broadcasting station'sprogramme number has been changed, the wrong programmenumber will be displayed on the SHOW VIEW programme screen instep 5. When this happens, set the correct Guide Programmenumber for that station. ( pg. 82, “S HOWVIEW®System Setup”)Downloaded From DvDPlayer-Manual.com JVC Manuals