Masterpage:Right-No-HeadingEN 89Filename [DR-M10SE_10Editing.fm]Page 89 February 12, 2004 5:23 pmPerfect Connections (Recommended)This is an example of recommended connections if yourTV has two 21-pin AV input (SCART) connectors.Connect the decoder to the satellite receiver’s connectorif you have a decoder, L-1 IN/OUT connector to TV’sconnector, and L-2 IN/DECODER connector to thesatellite receiver’s connector. Then connect the satellitereceiver and TV.NOTES:● Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 83)● You can use the Automatic Satellite Programme Recordingfunction ( pg. 63) with this connection.● To record a programme via the satellite receiver, select L-2mode by pressing PR +/– so that “L-2” appears on the frontdisplay panel.● To receive a scrambled broadcast, descramble the signal withthe decoder connected to the satellite receiver.● For details, refer to the instruction manual of the satellitereceiver and decoder.Outdoor unitSatellite cableSatellite receiverAerialTV aerial cable21-pin SCART connectorBack of TVANTENNA INANTENNA OUTAerial connectorDecoderMains outletBack of unitDR-M10SE_01.book Page 89 Thursday, February 12, 2004 9:08 PM
