JVC DR-M10 Instructions Manual

Also see for DR-M10: Instructions Instructions Instructions Instructions

Contents

Filename [DR-M10SE_07Playback.fm]Masterpage:Left+34 ENPage 34 February 12, 2004 5:09 pmPLAYBACK OPERATIONS (cont.)Audio Channel SelectionWhen watching bilingual programmes or playing discs on whichyou recorded bilingual or stereo programmes, you can choosethe desired audio channel.● When “SUPERIMPOSE” is set to “AUTO”, you can confirm onthe TV screen the audio channel you have chosen. ( pg. 95)● Each time you press AUDIO, the audio channel changes.NOTE:It is not possible for DVD-R/DVD-RW (Video mode) discplayback to switch the audio channel. The audio channel isplayed back as set in “AUDIO REC” ( pg. 94).Playback Control (PBC) Function— Locating a desired scene using themenu of a Video CD/SVCD with PBCSome Video CD/SVCD discs support the PBC function. PBC is anabbreviation of “Play Back Control”. A Video CD/SVCD discrecorded with PBC has its own menus, such as a list of the songson the disc. You can locate a specific scene by using the menu.1 Access the PBC menu.In stop modePress 4.2 Start playback.Press the number keys to enter the number of the desiredscene.● The unit starts playback of the selected item. “PBC” appears onthe front display panel.● When “NEXT” or “PREVIOUS” appears on the TV screen:Pressing NEXT advances to the next page.Pressing PREVIOUS returns to the previous page.● You can return to the menu by pressing RETURN.● The method of the operation is different depending on thedisc.NOTES:● If you want to playback a PBC-compatible Video CD/SVCDdisc without activating the PBC function, start playback in stopmode by using the number keys, instead of the 4 button, tochoose the track, then press ENTER.● To activate the PBC function when a PBC-compatible VideoCD/SVCD disc is being played back without the PBC function,press TOP MENU, or press 8 then press 4.TRACKUSEOn-ScreenDisplayFor main and sub audio of bilingualprogrammeFor main audio of bilingual programmeFor sub audio of bilingual programmeFor stereo discsFor audio of left channelFor audio of right channelTIMERPROG/CHECKNEXTPREVIOUSPAUSERECREC MODE LIVE CHECKSET UP DISPLAY ON SCREEN OPEN/CLOSEAUDIO SUBTITLE ANGLE PROGRESSIVESCANSLOWSLOW PLAY/SELECTSTOP/CLEARNAVIGATIONTOP MENURETURNENTERMENUABCJKLGHI MNOTUVPQRS WXYZAUXCANCEL MEMO/MARKDEFPRSAT#TV%SHOW VIEW/VIDEO Plus +80 – 9PREVIOUS4NEXTTOP MENU ENTERRETURNAUDIOWhen you can’t switch the audio channel of abilingual programmeWhen the unit is connected with a digital audio device usingan optional optical cable and “DIGITAL AUDIO OUT” is setto “DOLBY DIGITAL/PCM”, it is not possible to switch theaudio channel of a bilingual programme recorded on aDVD-RAM or DVD-RW (VR mode) disc. ( pg. 91) In thiscase, perform the following steps using the remote control toswitch “DIGITAL AUDIO OUT” from “DOLBY DIGITAL/PCM” to “PCM ONLY”.A Press SET UP to access the Main Menu screen.B Press w e to select “DVD SET UP”, then press ENTER.C Press w e to select “AUDIO OUTPUT”, then pressENTER.D Press rt to select “DIGITAL AUDIO OUT”, then pressENTER.E Press rt to select “PCM ONLY”, then press ENTER.( pg. 93)F Press SET UP to complete the setting.G Press AUDIO to select the desired audio channel.DR-M10SE_01.book Page 34 Thursday, February 12, 2004 9:08 PM