JVC DLA-NX5 Instructions Manual

6 Tighten the screws of the new lampunit0 Tighten the screws with a t screwdriver.7 Attach the lamp cover0 Slide the lamp cover from below and ensure thatthe two tabs at the top of the cover are insertedinto the projector unit.8 Tighten the screw with a tscrewdriver0 After ensuring that the corner indicated by thecircle is properly seated, tighten the screw witha t screwdriver.MEMOUsable lamp life0 When the lamp is used with “Lamp Power” set to“Low”, the lamp life on this unit is approximately 4500hours. This is the average usable time and not aguaranteed value.0 The lamp life may not reach 4500 hours depending onthe operating conditions.0 When the lamp has reached the end of its usable life,deterioration progresses rapidly.0 When the video image appears dark, when the colortone looks unnatural, or when the image flickers,replace the lamp unit with a new one promptly.Purchasing a lamp unitFor details, please consult your authorized dealer.0 Lamp unitProduct no.: PK-L2618U* Not suitable for household room illumination.* Lamps with a different product number or those forother projector models cannot be used.Information about the lampAn ultra-high pressure mercury lamp with a high internalpressure is used in the projector.Due to the characteristics of this lamp, it may blow outwith a loud noise or go out when it is subject to shock orafter using for a prolonged period of time (the time beforethe lamp blows out or goes out varies considerably witheach lamp as well as the operating conditions).After replacing the lamp0 Do not place the removed lamp unit at a place that iswithin reach by children or anywhere nearinflammable items.0 Dispose used lamp units in the same way asfluorescent lamps. Follow the regulations of your localcommunity for disposal.65Maintenance