JVC DLA-NX5 Instructions Manual

Whole Adjust (Fine) Operation ProcedureFor making general adjustments on the misalignment of the entire screen using “Adjust (Pixel)”, followed by makingfine adjustments.A Set “Adjust Area” to “Whole”B Select “Adjust Color” and “Adjust Pattern Color”C Select Adjust (Fine), and press the [OK] button0 The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed.0 The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.Adj.AreaPat.Col.Pixel/FineAdj.Col.H 0( 0/ 0)V 0( 0/ 0)BACKADVANCEDMENUGAMMASETTINGSC.M.D.PICTUREMODERedWhole Adjust (Fine)Pixel AdjustBackV (Vertical)H (Horizontal)Fine WindowAdjustment PatternD Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone0 The adjustment setting appears at the center of the Fine window.Adj.AreaPat.Col.Pixel/FineAdj.Col.H 0( 0/ 0)V 0( 0/ 0)BACKADVANCEDMENUGAMMASETTINGSC.M.D.PICTUREMODEH 2020 / 20V 5 5 / 5RedWhole Adjust (Fine)Pixel AdjustBackIndicates the maximum andminimum misalignment value ofthe entire screen.(Max. / Min.)Adjustment SettingRemote ControlOperation GuideColor forAdjustmentPixel Adjustment SettingE After adjustment is complete, press the [BACK] button twice to exit the Adjustment modeMEMO0 If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are “31”, youcannot select a value that is larger than the displayed setting even when the adjustment setting is lower than themaximum value.0 If the minimum overall screen misalignment is “-31”, you cannot select a value that is smaller than the displayedsetting even when the adjustment setting is higher than the minimum value.57Adjust/Set