JVC DLA-NX5 Instructions Manual

Connecting to the TRIGGER TerminalTrigger Input Terminal (Ø3.5)ScreenTrigger Cable (Sold Separately)To [TRIGGER] TerminalThis Unit0 Do not use it to supply power to other devices.0 Connecting to the audio terminal of another device may cause the device to malfunction or break down.0 Using beyond the rated value will cause the unit to malfunction.0 The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit.0 The factory setting is “Off”. To change the setting, configure the “Trigger” item in the menu (P. 61).Connecting the Power Cord (Supplied Accessory)A Connect the power cord supplied to the power input terminal onthe main unitB Insert the supplied power plug into the wall outlet.Precautions to prevent fire and electric shock0 The power consumption of this unit is large. Please connect it directly to the wall outlet.0 When you are not using the projector, please unplug the power cord from the outlet.0 Connect it using only the power cord supplied.0 Do not use a voltage other than the indicated power voltage.0 Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.Doing so may damage the power cord.0 Do not unplug the power cord with wet hands.ABPower Cord(Supplied)21Set up