JVC DLA-NX5 Instructions Manual

Selecting the Base Correction Value (Initial Value) for Adjustment0 Selecting one of the “Custom 1” to “Custom 3” settings in “Gamma” allows you to select the “Correction Value”.0 Select the base “Correction Value” for adjustment using the H I keys.0 The selectable correction values vary according to “Picture Mode”. (Refer to the table below.)List of selectable “Correction Value” according to “Picture Mode”Picture Mode Correction ValueFilm k l Film 1Film 2ImportCinemaNaturalUser 1 to User 61.81.92.02.12.22.32.42.52.6Cinema 1Cinema 2HDR(PQ)HDR(HLG)ImportPicture Mode Correction ValueHDR10 1.81.92.02.12.22.32.42.52.6Cinema 1Cinema 2HDR(PQ)ImportHLG 1.81.92.02.12.22.32.42.52.6Cinema 1Cinema 2HDR(HLG)ImportWhen “Correction Value” is set to “Import”0 By selecting “Import” for “Correction Value”, the gamma data created externally can be selected as the base settingvalue for adjustment.0 The factory setting for “Import” is “2.2”.0 You can use the calibration software to customize the gamma data adjustment, and import the created gamma data.Please check with your authorized dealer for details.39Adjust/Set