JAI SW-2000M-CL-65 User Manual

JAI SW-2000M-CL-65 User Manual Manual pdf 5 page image

SW-2000M-CL-65５1 GeneralThe JAI Sweep Series SW-2000M-CL-65 is a CMOS line scan camera based on a custom-made2048 pixel imager with large square pixels of 20 μm for high responsivity. It operates at a rateof up to 80,000 scans per second.The camera outputs digital data in 8-, 10-, or 12-bit formats, one, two, or three pixel values ata time via one Camera Link connector. The camera is configured by software through the serialcommunication port of the Camera Link interface or via a 10/100 Mbps Ethernet port using anindustry standard RJ-45 connector.The default lens mount is F-mount. Additional options will be added.The latest version of this operation manual can be downloaded from www.jai.com.For camera revision history, please contact your local JAI distributor.1.1 Camera nomenclatureThe standard camera composition consists of:SW-2000M-CL-65 camera body with F- mount x 1Lens mount/sensor protection cap x 1In the model number of the camera, SW stands for “Sweep” Series, 2000 represents theresolution “2000 pixels”, M stands for “monochrome”, CL stands for “Camera Link ®” interface,and 65 stands for “65 kHz” maximum scan rate.2 Main features• CMOS line scan camera• Resolution: 2048 x 1• Pixel size: 20 μm, square• Selectable Quantum Well size: 60k or 360k electrons• Selectable clock rate for sensor and data output• Maximum scan rate: 65,000 lines per second• Camera Link Base Configuration data interfaceo One connectoro 8, 10, or 12 bits per pixelo Single, dual, and triple data formats• DSNU correction as factory default• Flat field correction (FFC)• Test pattern generator for set-up and troubleshooting• Default lens mount: F-mount• DC input voltage range from +12 V to +24 V• Ethernet port foro Control and monitoringo Firmware updateso Download of files from camera (internal web server)• Short ASCII commands for set-up via Camera Link or Ethernet using the Telnet protocolo Windows user interface