JAI SW-2000M-CL-65 User Manual

JAI SW-2000M-CL-65 User Manual Manual pdf 24 page image

SW-2000M-CL-65247.1.4 Saving and restoring the capture settings7.1.4.1 CS – show image capture settingsThe command CS shows existing settings for this group of commands:• SENSOR• LINE RATE, LINE PERIOD• LINE CTRL• LINE IT• GAIN• OFFSET• CL MODE• CL RATE• READOUT• ROI• BINNING• FFC7.1.4.2 CS SAVE – save settings (1 st set)This command stores all the above-mentioned settings to the first location in non-volatilememory. The settings are loaded at power-up and during reboot of the camera.7.1.4.3 CS LOAD – load settings (1 st set)This command restores all the above-mentioned settings from the first memory location of thenon-volatile memory.Command DescriptionCS ? List of available Capture Settings group commands.CS Returns the present Capture Settings.CS SAVE Saves the present Capture Settings to the first memorylocation. Loaded during reboot and power-up.CS LOAD Loads the stored Capture Settings from the first memorylocation.CS SAVE2 Saves the present Capture Settings to the second memorylocation.CS LOAD2 Loads the stored Capture Settings from the second memorylocation.CS FACTORY RESET Restores the Capture Settings to the factory values andsaves them to the first memory location.