|
SW-2000M-CL-6540C – Commands affecting image output formatCommand Function Command Format Parameter Remarks1 Camera Link mode CL MODE SINGLE 8SINGLE 10SINGLE 12DUAL 8DUAL 10DUAL 12TRIPLE 88 bits, 1 pixel/clock10 bits, 1 pixel/clock12 bits, 1 pixel/clock8 bits, 2 pixels/clock10 bits, 2 pixels/clock12 bits, 2 pixels/clock8 bits, 3 pixels/clock2 Camera Link clockfrequencyCL RATE CL RATE MINFrom 20 to 85 MHz.MIN is to use the slowestsufficient rate.Both in steps of 5 MHz.3 Readout direction READOUT Normal or Reverse4 Set the regions ofinterest ROI Pixel numbers, 1 to 4regions.5 Activate ROI ROI ON6 Deactivate ROI ROI OFF7 Pixel binning BINNING AVG, SUM or OFFD – UtilitiesCommand Function Command Format Parameter Remarks1 Help HELP or ‘?’ list of commands2 Help on any specificcommand add a ‘ ?’examples:GAIN ?LINE RATE ?3 Query of existingsetting with noparametersexamples:GAINLINE RATE4 Camera informationand settings STATUS4 Camera identifiersand version numbers VERModel, SN, MAC.Versions: MCU, HW,sensor, logic.5 Selection of testpatternsTEST TEST OFFFrom P1 to P56 Re-booting thecamera REBOOT close telnet sessions7 Firmware update FIRMWARE UPDATE http://10.10.10.10
|
