Honeywell VISTA-128BPTSIA User Manual

Also see for VISTA-128BPT: Overview Programming guide User guide Installation and setup guide Installation and setup guide

Contents

Honeywell VISTA-128BPTSIA User Manual Manual pdf 51 page image

– 51 –Programming Device TimersGeneral InformationDevice timers consist of an ON time & an OFF time, and selected days of theweek in which they are active. There are up to 20 timers that can be used tocontrol various devices, such as lights or appliances. Your installer will haveprogrammed the appropriate devices into the system (up to 96 devices can beprogrammed).Each timer controls a single device (designated as an output number) thatyou select. For example, timer 1 might be set to turn the porch lights on at7:00pm and turn them off at 11:00pm. Timer 2 might turn on the airconditioner Monday-Friday at 4:30pm to cool the premises before you arriveat 5:00pm, and turn it off at 10:00pm when you are retiring for the night. Ifdesired, different timers can control the same device. For example, timer 2could be used Monday-Friday as in the previous example, and timer 3 couldbe set to turn the air conditioner on and off at different times Saturday andSunday.To enter the device timer menu mode:Enter your security code, then press the # key followed by 83.OUTPUT TIMER # ?01-20,00=QUIT 01Up to 20 timers can be programmed. Each timeris identified by a number 1-20. Enter the desiredtimer number to be programmed (1-20). Press *to accept entry.06 07:00P 11:45PPORCH LITE 04If that timer number has already beenprogrammed, a summary screen will appear. Inthis example:06 = Timer #04 = Output Device # affected by this timerPORCH LITE = Output Descriptor for Device 407:00PM = Start Time;11:45PM = Stop TimePress * to continue.See your installer fordevice numbers. 00 ENTER OUTPUT#00Enter the desired output device number (1-96).As the number is entered, the device's descriptionwill appear.To delete a previously programmed timer, enter00 as the output number.