Honeywell VISTA-128BPTSIA User Manual

Also see for VISTA-128BPT: Overview Programming guide User guide Installation and setup guide Installation and setup guide

Contents

Honeywell VISTA-128BPTSIA User Manual Manual pdf 52 page image

– 52 –Programming Device Timers (cont’d)00 ON TIME ?00:00 PMEnter the time you want the device turned onusing 00:01 - 11:59 format. When the displayshows the desired time, press the * key to moveto the AM/PM field. Press any key 0-9 to changethe AM/PM indication.Enter 00:00 if this timer is not being used to turnsomething ON for the days selected below. (Ex.using one timer to turn lights on one day andusing another timer to turn them off on anotherday).00 OFF TIME ?00:00 PMEnter the time you want the device turned offusing 00:01 - 11:59 format. When the displayshows the desired time, press the * key to moveto the AM/PM field. Press any key 0-9 to changethe AM/PM indication.Enter 00:00 if this timer is not being used to turnsomething OFF for the days selected below. (Ex.using one timer to turn lights on one day andusing another timer to turn them off on anotherday).00 DAYS? MTWTFSSHIT 0-7 X XSelect the days on which the device is to beactivated by entering 1-7 (Monday = 1). An "X"will appear under that day, indicating the outputfor that day is active. Entering a day's numberagain will deactivate that day. Pressing 0 willturn all days on/off. The outputs will only be ineffect for the days that have the letter xunderneath them. As the week progresses, thedays are reset to the inactive state, unless thepermanent option is selected (next screenprompt). When completed, press * to continue.00 PERMANENT ?0 = NO, 1 = YES 0Answering 1 (YES) means the system executesthis timer continuously. Answering 0 (NO)meansthe system executes each day's output only once.