Honeywell TUXWIFIS Installation And Setup Manual

Also see for TUXWIFIS: Installation and setup guide INSTALLATION GUIDE/USER GUIDE

Contents

Honeywell TUXWIFIS Installation And Setup Manual Manual pdf 31 page image

Security (cont’d)31NOTE: The authorized code for deleting, adding, and editing users is dependent upon the alarm panelyou are interfacing with. Check your alarm panel Installation and Setup Guide to determinewho can delete, add, and edit users.Add a UserFrom the "Home" screen, press the Setup icon and then the System setup icon.Press the USER SETUP and ADD USER icons, then enter your authorized code. Press the boxnext to Enter User Name and type in the user name (max. 6 characters; no spaces between characters);press the OK icon.Press the box next to User Number and enter an “available” (3-digit) user number; press the OK icon.Press the box next to Enter User Code, enter the 4-digit User Code for this user and press the OK icon.Press the box next to RF Button Zone (if used); enter the 3-digit RF Button Zone for this user.Press the Save icon.NOTES:• For available user numbers, refer to the control panel instructions.• If assigning this user to wireless key, enter one of the zone numbers of the keyfob (the wireless keymust be programmed first before it can be assigned to a user).How to Add an Existing User to a Second TuxedoAfter adding a user to the first Tuxedo, the same user can be added to a second Tuxedo. From thesecond Tuxedo go to “User Setup” and enter the same user name and same user code (refer to “How toAdd a User” above). The second Tuxedo will automatically update the user information. Press Save.Delete a UserSelect the User you want to delete and press the DELETE USER icon. Enter your authorized code,and press the appropriate icon.Edit a UserNOTE: You cannot edit a User name or User number. To modify a User name or User number, youmust delete the User and re-enter the User. Edit a User as follows:Press the EDIT USER icon and enter your authorized code. Select the options needed for this userand press Save.NIGHT Setup FunctionThe NIGHT function can be set to arm the system in one of five arming modes:• Away - Arms all zones with entry delay.• Stay - Arms perimeter zones with entry delay.• Instant - Arms perimeter zones without entry delay.• Night (Residential Panels Only) – Arms all perimeter zones plus all zones listed in Zone List 5.• Maximum - Arms all zones without entry delay. Not to be used for ANSI/SIA CP-01 installations.