Honeywell Galaxy Flex User Manual

Also see for Galaxy Flex: Installer manual

Honeywell Galaxy Flex User Manual Manual pdf 21 page image

21Output Test (32 ent)Use this option to test the external bell and strobe.To test a bell or strobe:1. Select either bell or strobe, and then press ent. The device state (on or off) isdisplayed.2. Press ent to toggle the status on or off to test the device.3. Press esc to end the test.Time/date (41 ent)Use this option to set the system time and date. There are two sub-options;A=TIME and B=DATE.Enter time in 24 hour notation (hh:mm), and the date in 6-digit notation(dd/mm/yy).Codes (42 ent)The system can have up to 100 users, with user codes assigned as follows: 001 to 097 assigned to any user 098 reserved for Manager 099 reserved for Engineer 100 reserved for remote accessYou can give each user a PIN code, a wireless keyfob and/or a prox tag. Onceassigned, users can modify their own PIN codes. You can also assign an accesstype that controls what the user can and can’t do.Press 42 ent 1 ent to view users. The first user details are displayed and a typicalexample is shown below:Use A and B to scroll to other users.Press ent to show the options for that user, starting with Modify PIN. Use A and Bto scroll between the options.001 USER R □ mL3 A *12345678RF fobassigneduser nameuser codeuser type (level) assigned groupsgroup choiceprox tagassigned□ = no PIN assigned■ = PIN assigned