Honeywell Galaxy Flex User Manual

Also see for Galaxy Flex: Installer manual

Honeywell Galaxy Flex User Manual Manual pdf 11 page image

11TCB800M keyfobThe TCB800M is a multi-function keyfob. However, depending on howyour installer has configured the keyfob, you may not have access to allof the functions detailed in Table 1 below.Table 1 TCB800m button combinationsButtonCombinationsFunction LEDs CommentsFull Set When one or more buttons ispressed, the relevant LEDs flashuntil the panel responds.If a successful response isreceived the relevant LEDs stay onfor 3 seconds.If an unsuccessful response isreceived the relevant LEDs stopflashing and turn off.The LEDs pulse slowly when theUnset all button is pressed.Unset allPart setandPanic (holdbuttons for 3seconds)and Stop LEDs thenUse this function to save batterylife by turning off the LEDs.Ask for status(hold button for3 seconds)Returns Panel Set Status(see Panel Status table below)If the system status is requested as shown above the status is indicated on theTCB800M as shown in the table below.Table 2 Panel statusPanel status(Groups disabled)Panel Status(Groups enabled)LEDs CommentsFull Set All groups Full Set LEDs flash until the panelresponds.If a successful response isreceived by the TCB the LEDstays on for 3 seconds.If an unsuccessful responseis received the LEDs stopflashing and turn off.Unset All groups UnsetPart Set All groups Part SetN/A Groups in differentstatesSetting in progress Setting in progress Stops flashing with all LEDsoffReset required Reset required