Honeywell Galaxy Dimension Quick User Manual

Also see for Galaxy Dimension: User guide Installation guide Manual

Contents

Honeywell Galaxy Dimension Quick User Manual Manual pdf 3 page image

3To assign or modify any of the user’s settings withinmenu option 42.1=User Codes:1. Access the menu option 42.1=UserCodes.2. Press A > to scroll to the correct usernumber and then press ent.3. Press A > to scroll through the user codemenu options.Modify PINA user’s PIN is a unique 4-6 digit code that each userhas to identify them to the system.To assign or modify a user’s PIN:1. Press A > until 01=Modify PIN isdisplayed on the keypad’s LCD, and thenpress ent.2. Key in the user’s new 4-6 digit PIN, the *(star key) can be used to erase the lastdigit keyed in.3. Press ent to store the PIN.4. Press esc to return to the banner.Modify LevelA user’s level determines the functions and menuoptions available to that user.To assign or modify a user’s level:1. Press A > until 02=Modify Level isdisplayed on the keypad’s LCD, and thenpress ent.2. Press the A > and < B keys to scroll up ordown to the level required.3. Press ent to store the level.4. Press esc to return to the banner.Note: A user’s level defaults to 2.3. Forinformation on the different user levelsrefer to the full user guide.Modify GroupsA user’s groups determine which system groups thatuser has access to and control over.To assign or modify a user’s groups:1. Press A > until 06=Modify Groups isdisplayed on the keypad’s LCD, and thenpress ent.2. Key in the group numbers you want toassign to the user.3. To assign the group choice option to auser, press the * (star key) after keying inthe group numbers.4. Press ent to store the user’s groupallocations.5. Press esc to return to the banner.MAX TagA MAX tag is a prox tag that can be presented to aproximity reader to set and unset the system andcancel alarms, faults or tampers.To assign a user a MAX tag:1. Press A > until 07=Card No is displayedon the keypad’s LCD, and then press ent.2. Key in the MAX tag’s serial number, the* (star key) can be used to erase the lastdigit keyed in.3. Press ent to store the serial number.4. Press esc to return to the banner.Alternatively, if you have a keyprox:1. Press A > until 07=Card No is displayedon the keypad’s LCD, and then press ent.2. Hold the keys 1 and A > until a doublebeep is heard.3. Present the MAX tag to the proximityreader at the bottom of the keyprox, theMAX tag’s serial number will appear inthe keyprox’s LCD.4. Press ent to store the serial number.5. Press esc to return to the banner.