Running MailThe way you will handle mail mainly depends on the weighing method you have chosen.The weighing method is indicated by the icon in the Weighing Type zone of the screen. .If you need to change the current account before applying postage(on account-enabled configurations), see How to Change Accountson page 50 .How to Apply Standard Postage (Running Mail)In mode Standard Weighing ( )From the [Standard ] home screen, to print postage directly on mail pieces:1. Put the mail piece on the Weighing Platform.The weight of the mail piece is displayed in the Weight area of the screen and thepostage amount is updated.2. Press . The system motors start running.If the Smart Start function is activated, the motors start automatically when you withdrawthe mail piece from the weighing platform. To enable Smart Start, see How to Activate/ Deactivate Smart Start on page 137 .3. Withdraw the envelope from the WP and insert it into the mail path against therear-guide wall, with the side to be printed facing upwards.If you want to seal the envelope, first engage the flap into the moistener.Do not try to moisten self-adhesive envelopes.If a mail piece is bigger than mail path maximum thickness (seeMail Specifications on page 203 ), you may use a label tape.383 Processing Mail
