Frequently Asked QuestionsSystem check list:Look at the funds counter at the bottom of the screen,or:Press and enter 1 to check your funds balance.To add funds, see How to Add Funds to the PSD(Meter) on page 72 .Do I have enough postage?Clear batch counters if you intend to issue a reporton the mail run you are about to start (see BatchData Report on page 95 ).Select Reset counter on the home screen, orSee How to Reset Batch Counters on page 65 .Do I need to clear the BatchCounter ?For sealing while printing the envelopes.See Filling the Moistener (Option) on page 187 .Is the sealing/moistening deviceproperly filled?(if installed)Before laying envelope(s) on the Weighing Platform,your Home Screen should display 00 lb 0.0 oz . If__lb _._oz is displayed, perform a 'rezero' of the WP.See How to Rezero the Weighing Platform on page143 .Is the Weighing Platform proper-ly zeroed or tared?To display the level of ink in the printing headset,see How to Display Ink Level and Cartridge Data onpage 180 .Is there enough ink in the car-tridge ?You can be warned when the available funds gets below a presetvalue (see How to Set the Low-Funds Threshold on page 139 ).343 Processing Mail
