Harman Kardon DVD 16/230 Service Manual

Contents

Harman Kardon DVD 16/230 Service Manual Manual pdf 14 page image

29Artwork number: 080-14371 HDMI Output2 Coaxial Digital Output3 AC Power Cord��ENGLISHRear Panel ConnectionsREAR PANEL CONNECTIONS0 HDMI Output1 Coaxial Digital Output2 AC Power Cord0 HDMI Output: Connect this output to an HDMIinput on the receiver or video display for thehighest-quality uncompressed digital audioand video available. Even if your receiver is notcapable of processing audio in the HDMI format,you may still experience the superb reproductionof HDMI video.The AVR Receiver in your AVR/DVD system can switchbetween three HDMI inputs and send the video signalto your screen from its HDMI Output. No surroundsound decoding takes place in the Receiver fromHDMI inputs, so no surround sound will be heard ifonly HDMI is connected. you MUST connect the DVDPlayer's Coaxial Digital Output to the AVR Receiver'sCoaxial Digital Input 2 to hear Dolby Digital and DTSsurround sound through your new AVR/DVD system.If your video display has a DVI input, you may usean optional HDMI-to-DVI cable or adapter for theconnection to the display.In all cases, the video display must be HDCP-compliantin order to use the HDMI output.For best results, we do not recommend HDMIconnections in excess of 3m (10 ft).1 Coaxial Digital Output: Connect this jack tothe coaxial digital input of an A/V receiver orsurround processor for Dolby Digital, DTS or PCMaudio playback.The AVR Receiver in your AVR/DVD system has twocoaxial digital inputs. Be sure to connect the DVDplayer’s Coaxial Digital Output to the Receiver’s CoaxialDigital Input 2. you MUST connect the DVD Player'sCoaxial Digital Output to the AVR Receiver's CoaxialDigital Input 2 to hear Dolby Digital and DTS surroundsound through your new AVR/DVD system.Note: The coaxial digital output should only beconnected to a digital input. Even though it is thesame RCA-type connector as standard analog audioconnections, DO NOT connect it to a conventionalanalog input jack.2 AC Power Cord: Connect this plug to an ACoutlet. If the outlet is controlled by a switch,make certain that it is in the ON position.Note: you’ll find more details about all Audio/Videoconnections under Setup and Connections on thefollowing pages.0220CSK - HK AVR-DVD System OM, WORK R2 01.indd 29 12/07/10 14:11:30harman/kardonDVD 16 and 18 /230V Service ManualPage 14 of 39