Menu
Handcell DAG1000 Series User Manual
                                                      | |
Contents
| 
DAG1000/2000 Series FXS Voice Gateway User Manual10to network;（3）Telephone is connecting to FXS port of device.1) Configure dynamic IP address by DHCP：Offhook; Dial “*150*2#”; Onhook;If the equipment hint success, after 10 seconds, and restart the equipment.(Power-off then power-on)2) Configure Static IP addressOffhook; Dial “*150*1#”; Onhook;Then configure IP and mask as follow:• Configure IP address：Offhook; input “*152*172*16*0*100# ”; onhook• Configure subnet mask：Offhook; input “*153*255*255*0*0# ”; onhook• Configure gateway IP addressOffhook; input “*156*172*16*0*1# ”; onhook.3) Query the IP address of device: Offhook, input“*158#”4) If the DAG serial uses PPPoE method to get IP address ，it need to configure byweb browser.【Note】：the telephone will play voice prompt “Setting successfully” if the step is correct4. WEB Configuration4.1 WEB LoginDevice is connecting to network properly, refer to chapter 3 “Operation”. Offhook anddial*158# to inquire device IP address.4.1.1 LoginDevice LAN port default IP address is 192.168.11.1, WAN port default obtain IP address byDHCP. Advice to modify the IP address of the local computer equipment and ensure that |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved