Haier L1510A-C User Manual

Avoid using any abrasive cleaners which may scratch or damage the LCD screen. Also, avoid contact with objects that may scratch the LCD screen. Use a soft, dry cloth for cleaning.

If the unit is disabled by an electrostatic discharge, please turn off the power to the unit and turn it back on to reset.

Allow enough space for proper ventilation. Do not place the unit on unstable, dusty and humid places, in direct sunlight, or near heat sources.

To connect your PC to the TV for both audio and video, use the VGA IN port for video and the PC AUDIO IN port for audio. Connect the 15PIN analog output connector of the PC display card to the VGA IN port and the PC output connector to the PC AUDIO IN port.

To connect a DVD player to the TV, use the AV /S-VIDEO/COMPONENT Audio Input. Connect the audio output from the DVD player to the corresponding audio jacks (L and R) and the video output to the appropriate video input (VIDEO IN, S-VIDEO, or COMPONENT IN) depending on the type of connection your DVD player supports.

You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 181 channels, and you can press the keys on the remote control or on the panel to make a selection.

To change the language of the menu, press the MENU button and use the VOL+/VOL- buttons to navigate to the 'LANGUAGE' option. Then, press the CH+/CH- button to enter the function menu and use the VOL+/VOL- buttons to select your preferred language.

To enable or disable Closed Captioning, press the MENU button and use the VOL+/VOL- buttons to navigate to the 'CC MODE' option. Then, press the CH+/CH- button to enter the function menu and use the VOL+/VOL- buttons to select the desired Closed Captioning mode (OFF, CC1, CC2, CC3, CC4, TT1, TT2, TT3, or TT4).

To access the tuning menu, press the MENU and VOL+/VOL- buttons until the tuning menu appears on the screen. This menu includes options like TUNING, CHANNEL, SKIP, AFC, FINE TUNE, ANTENNA, and AUTO PROGRAM. This menu is only available in TV mode.

To skip a channel, go to the tuning menu by pressing the MENU and VOL+/VOL- buttons. Navigate to the SKIP option using the CH+/CH- buttons. Press VOL+/VOL- to select ON, and this channel will be skipped the next time you press CH+/CH-. To restore the channel, select OFF.