VINVINConnection InstructionsCable TV Setup- After subscribing to a cable TV service from a local provider you can watch cableTV programming. The TV cannot display TV programming unless a TV tunerdevice or cable TV converter box is connected to the TV.- For further information regarding cable TV service, contact your local cable TVservice provider(s).Connection Option 11. Select 3 or 4 with channel switch on cablebox.2. Tune the TV channel to the same selectedoutput channel on cable box.3. Select channels at the cable box or withthe cable box remote control.Connection Option 21. Connect the audio and video cables fromthe Cable Box's output jacks to the TVinput jacks, as shown in the figure.Whenconnecting the TV to a Cable Box, matchthe jack colors(Video = yellow, Audio Left = white, andAudio Right = red).2. Select the input source by using the TV/AVbutton on the remote control.3. Select your desired channel with theremote control for cable box.External AV Source SetupHow to connectConnect the audio and video cables fromthe external equipment's output jacks to theTV input jacks, as shown in the figure.When connecting the TV to external equip-ment, match the jack colors (Video = yellow,Audio Left = white, and Audio Right = red).How to use1. Select the input source by using the TV/AVbutton on the remote control.2. Operate the corresponding external equi-pment. Refer to external equipment ope-rating guide.