33Hardware management and maintenanceThis chapter includes these sections:• Displaying hardware information of the router• Displaying the temperature alarm thresholds for an interface module• Configuring a combo interface• Displaying transceiver module information and alarming information• Solving system faults• Saving the running configuration of the router• Rebooting the routerNOTE:The CLI and outputs depend on your router model. For more information about the commands used in thischapter, see the corresponding command references.Displaying hardware information of the routerDisplaying software and hardware version information of therouterUse the display version command to display software and hardware version information of the router.The output includes the following information: the current software version and hardware version, routeroperating time, and the type and operating time of each interface module. display versionH3C Comware Platform SoftwareComware Software, Version 5.20, R0600Copyright (c) 2010 Hangzhou H3C Technologies Co., Ltd.H3C SR6602 uptime is 0 week, 0 day, 0 hour, 4 minutesCPU type: RMI XLR732 1000MHz1024M bytes DDR2 SDRAM Memory4M bytes Flash MemoryPCB Version: Ver.BLogic Version: 135.0Basic BootWare Version: 1.16Extend BootWare Version: 1.31[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)135.0[FIXED PORT] AUX (Hardware)Ver.B, (Driver)1.0, (Cpld)135.0[FIXED PORT] GE 0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0[FIXED PORT] GE 0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0[FIXED PORT] GE 0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0[FIXED PORT] GE 0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0
