196ipv6 netstream export rateUse ipv6 netstream export rate to configure the limit on the IPv6 NetStream data export.Use undo ipv6 netstream export rate to remove the IPv6 NetStream data export limit.Syntaxipv6 netstream export rate rateundo ipv6 netstream export rateDefaultThe export rate of IPv6 NetStream data is not limited.ViewsSystem viewDefault command level3: Manage levelParametersrate: Specifies the maximum rate for exporting IPv6 NetStream data, in the unit of the maximum numberof packets per second, in the range of 1 to 1000.Usage guidelinesThe export rate limit applies to each card. As the aging timer is different, the configuration may not bevery accurate on a multi-CPU device.Examples# Allow 10 packets at most to be exported per second. system-view[Sysname] ipv6 netstream export rate 10ipv6 netstream export sourceUse ipv6 netstream export source to configure the source interface for IPv6 NetStream data export.Use undo ipv6 netstream export source to remove the configuration.Syntaxipv6 netstream export source interface interface-type interface-numberundo ipv6 netstream export sourceDefaultThe interface connecting to the NetStream server, where the IPv6 NetStream data is sent out, is used asthe source interface.ViewsSystem view, NetStream aggregation viewDefault command level3: Manage levelParameters