73Field Descriptionfilter disper Dispersion information.reference clock statusStatus of the reference clock:• working normally.• working abnormally.timecode Time code.Total associations Total number of associations.NOTE:When a device is operating in NTP broadcast/multicast server mode, using the display ntp-servicesessions command on the device does not display the NTP session information corresponding to thebroadcast/multicast server, but the sessions are counted in the total number of associations.display ntp-service statusUse display ntp-service status to view NTP service status information.Syntaxdisplay ntp-service status [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameters|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# Display NTP service status information. display ntp-service statusClock status: unsynchronizedClock stratum: 16Reference clock ID: noneNominal frequency: 100.0000 HzActual frequency: 100.0000 HzClock precision: 2^17Clock offset: 0.0000 msRoot delay: 0.00 msRoot dispersion: 0.00 ms
