Menu
Gearmore PDC400 Operation, Service & Parts Manual
                                    | |
Contents
| 
6. GENERAL MAINTENANCE246.3 STORAGE:It is a good use not to wait for using the machine to carry out repairing and maintenance. To repair andto replace the parts that are broken or damaged before the storage, in order to have always the machineready for being used.To store the machine in a sheltered place away from atmospheric agents and protect it in order to avoiddeteriorations.The fertilizers are generally corrosive, For this reason it is important that no particles of fertilizer remainon the machine for long periods of time.Before storing the machine for long periods, it is necessary to operate as follows:~ Wash accurately the machine and the inside of the hopper.~ To carry out a general control by sight of the machine in order to check eventual structuraldamages, to find eventual deep abrasions on the paint.~ To check that the safety decals are present in their positions, that they are integral and readable,and in case they are deteriorated or unreadable, carry out immediately their replacement.~ To grease all the mechanical parts.~ To store , if possible, the machine in a sheltered place away from children.6.4 SPARE PARTS:For the replacement of parts of the spreader, the customer must use only original parts, ordering themdirectly from an authorized dealer.Carrying out the order, it is necessary to specify what the identification label brings, in particular:● Serial number (frame number)● Model● Manufacturing year |
Related manuals for Gearmore PDC400
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved