nüvi 310/360/370 Owner’s Manual appendIxMounting the nüvi on Your DashboardUse the enclosed mounting disk to mount your nüvi to the dashboard.important: The permanent mounting adhesive is extremely difficult to remove afterit is installed.To install the mounting disk:DiskSuctioncup mountSuctionlever1. Clean and dry the dashboard where you wantto place the disk.2. Remove the backing from the permanentmounting adhesive on the bottom of thedisk, and place the disk on thedashboard.3. Place the suction cup mount on top of the disk4. Flip the suction lever down to secure the suction cup mount to the disk.Removing the nüvi and the Mount1. To remove the nüvi, press up on the tab on the bottom of the cradle.2. Lift the nüvi off of the mount.3. To remove the suction cup from the windshield, flip the lever toward you.4. Pull the tab on the suction cup toward you.Removing the Cradle from the MountTo remove the cradle from the mount arm, turn the cradle to one side. The cradlesnaps off of the ball socket. To replace the cradle, snap the cradle on the ball socket.