3 nüvi 310/360/370 Owner’s ManualusInG an fm tmc traffIc receIverU sinG fM TrafficIf you are using a traffic receiver, you can view traffic information on your nüvi.When a traffic message is received, your nüvi displays the incident on the map, andyou can change your route to avoid the traffic incident. For traffic data coverage areas,refer to the Garmin Web site at www.garmin.com/fmtraffic.note: The FM traffic receiver and nüvi must be in data range of an FM stationtransmitting traffic data to receive traffic information.note: Garmin is not responsible for the accuracy of the traffic information. TheFM traffic receiver simply receives signals from the traffic service provider anddisplays that information on your nüvi.note: You can only access the traffic information if the nüvi is connected to anFM traffic receiver.Connecting the FM Traffic Receiver1. Place your nüvi into the mount, and plug it into the 12/24-Volt adapter.2. Plug the mini-USB cable from the FM traffic receiver into the USB connectoron the side of the nüvi.Connecting the FM Traffic Receiver