Garmin Personal Navigator GPS 100AVD Owner's Manual

Also see for Personal Navigator GPS 100AVD: Installation manual

Contents

Garmin Personal Navigator GPS 100AVD Owner's Manual Manual pdf 35 page image

4-10· Place the cursor over the waypoint name on line 1 and press the leftarrow key to scroll up the list.Remember the waypoint review feature will allow you to quickly scan thedefinition of a nearest waypoint by pressing the ENT key with the cursor overthe desired waypoint.4.8 PROXIMITY ALARM WAYPOINTSName Alarm Distance Total Proximity WaypointsPROXIMITY WAYPOINT PAGEThe Proximity Waypoint Page allows you to define an alarm circle around awaypoint. Boaters may wish to define a proximity alarm waypoint around arock or sand bar. Pilots may wish to define a proximity alarm waypoint arounda restricted use airspace such as a MOA or TCA. The GPS 100 will notifyyou with an alarm tone and the message “PROX ALARM-PRESS NAV” if youenter the alarm circle. After you view this message, press the NAV key. ThePosition Page will display the range and bearing from the proximity waypointto your position. (See Section 5.2 for information on the Position Page.)The GPS 100 allows you to define up to 9 proximity waypoints. The ProximityWaypoint Page displays 3 proximity waypoints at a time. Additional waypointsare viewed by scrolling through the proximity waypoint list. The number ofproximity waypoints is displayed in the upper right corner of the page.To scroll through the proximity waypoints...· Place the cursor over the alarm distance on line 3 and press the rightarrow key to scroll down the list.· Place the cursor over the waypoint name on line 1 and press the leftarrow key to scroll up the list.