56ReferenceMain Menu:Trip, Time and Pages TabsTrip Tab — Displays Trip Odometer, Moving Average speed, Total Average speed, Maximum Speed,Stopped Time, Moving Time, Total Time, and Odometer.To reset data in the Trip tab:1. Press MENU, then highlight ‘Reset Trip’, ‘Reset Odometer’, ‘Reset Max Spd (speed)’, or ‘Reset All’and press ENTER/MARK.Time Tab — Displays the current time and date, allows you to select the 12 or 24 hour time format,enter a time zone and adjust for daylight savings to show correct local time.The following settings are available:• Time Format — Choose from 12 or 24 hour (military) time format.• Time Zone — Choose your correct time zone to show correct local time or enter a UTC Offset. TheUTC (also called Greenwich Time) offset is how many hours you are ahead or behind the time line.See the table on page 72 for time offsets.• Daylight Savings Time — Choose from ‘Auto’, ‘On’, or ‘Off’ to adjust for daylight savings.Page Tab — Allows you to turn the display of the main pages on/off or ‘Jump To’ a particular page.To select/deselect a main page:1. Use the ARROW KEYPAD to highlight the box to the left of the page name. PressingENTER/MARK will select/deselect that page. When a page is selected a ‘9 ’ will appear in the box.You must leave at least one page checked.The following options are available by pressing MENU:• Enable All Pages — Selects all pages.• Basic Trackplotter — Selects Map page only.• Nav Tools Only — Selects Compass, Highway, and Active Route pages only.To ‘Jump To’ a specific page:1. Use the ARROW KEYPAD to highlight the ‘Jump To’ option to the right of the desired page andpress ENTER/MARK.Trip TabTime TabSelectableData FieldsNon-SelectableData Field