17Getting StartedDeleting Track Logs/Powering Off UnitTo select the Track submenu tab:1. Use the ARROW KEYPAD to highlight the ‘Trk’ tab on the Main Menu page. You will see theoptions for the Track tab appear to the right of the Main Menu list.2. Press RIGHT on the ARROW KEYPAD to highlight the ‘Active’ tab.The Track Log Page allows you to specify whether to record a track plot, define how it is recordedand save your current track log. It also provides both an indicator of the percentage of total memoryused and menu options to save or clear the active track log.To clear the active track log:1. With the ‘Active’ Track submenu selected, press MENU then highlight the ‘Clear’ option and pressENTER/MARK. A confirmation page will appear.2. Highlight the ‘OK’ prompt and press ENTER/MARK to confirm.3. Press PAGE or QUIT to return to any of the main pages.Congratulations! You’ve now gone through the basic operation of the GARMIN GPS 152. Yournew GPS is a powerful tool with many advanced features not covered in the Getting Started tour. Fordetailed instructions on using these features or performing a specific task, please refer to the QuickReference Guide or the appropriate reference section of this manual.To turn the GPS 152 off:1. Press and hold the POWER key for about 2 seconds, until the screen is blank.2. When the screen is blank, release the POWER key.The next section of the manual describes the pages and functions of the GPS 152 in detail. If youare unable to locate a specifi c option or function, please refer to the Index on pages 85-87. Thankyou for choosing the GARMIN GPS 152 navigation unit. We hope it will be a useful and fun toolfor you wherever you go!Submenu TabsSubmenu Options