Garmin GPS 152 Owner's Manual And Reference Manual

Also see for GPS 152 - Marine Receiver: Owner's manual and reference guide Declaration of conformity Declaration of conformity Owner's manual and reference guide

Contents

Garmin GPS 152 Owner's Manual And Reference Manual Manual pdf 65 page image

55ReferenceMain Menu:Track Tab• Interval — Defi nes the frequency for recording the track plot. Three interval settings are available:Time — Records track plot based on a user-defined time interval.Resolution — Records track plot based upon a user-defined variance from your course over ground.The resolution option is the default setting and is recommended for the most efficient use of memoryand TracBack performance. The distance value (entered in the value field) is the maximum errorallowed from the true course before recording a track point.Distance — Records track based on a user-defined distance between points.• Value — Defi nes the distance or time used to record the track log.For the ‘Active’ tab, the following options are available by pressing MENU:• Save — Allows you to save the current active track log.• Clear — Allows you to clear the active track log currently stored in memory.For the ‘Saved’ tab, the following options are available by pressing MENU:• Show Map — Displays the saved track log on a Track Map page.• Delete Track — Deletes highlighted saved track from memory.• Delete All — Deletes all saved tracks from memory.You may also activate a TracBack from any of the saved tracks on this tab.To activate a TracBack from the ‘Saved’ tab list:1. Using the ARROW KEYPAD, highlight the track you wish to use for a TracBack and pressNAV/MOB.2. The ‘Follow ’ will automatically appear highlighted. Press ENTER/MARK.3. Choose either ‘Original’, which will navigate you from the end to the start of your trip, or ‘Reverse’,which will navigate you from the start to the end of your trip and press ENTER/MARK.Use the ‘Show Map’ option to display a saved track.The track name will automatically appear when highlightedon the ‘Saved’ list and NAV/MOB is pressed.