Garmin GPS 152 Owner's Manual And Reference Manual

Also see for GPS 152 - Marine Receiver: Owner's manual and reference guide Declaration of conformity Declaration of conformity Owner's manual and reference guide

Contents

Garmin GPS 152 Owner's Manual And Reference Manual Manual pdf 41 page image

31ReferenceCreating Waypoints5. To enter an optional depth, highlight the “Depth” field to the right of the position coordinatesand press the ENTER/MARK key, then use the ARROW KEYPAD to enter a value and pressENTER/MARK. If you are receiving valid sonar NMEA input (page 83) , the depth field willautomatically fill in. Otherwise, you must manually enter a depth.6. When done, use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK tosave the waypoint into memory.Creating Waypoints GraphicallyWaypoints may also be quickly created with the Map Page cursor, which allows you to ‘point andshoot’ at any map position or map feature to create a new waypoint. When you move the cursor over amap item, you will see a highlighted description of that item. The GPS 152 will use the map item textshown on the cartography as the default name and symbol.To create a new waypoint on an open map location (not a map item):1. Use the ARROW KEYPAD to move the cursor to the desired map position.2. Press and quickly release the ENTER/MARK key to capture the cursor location (pressing andholding the ENTER/MARK key will capture the current location, not the cursor’s location).3. The ‘New Map Waypoint’ page will appear. To accept the waypoint with the default name andsymbol, highlight ‘OK’ and press ENTER/MARK.To change the name, symbol or enter a depth, highlight the appropriate field and pressENTER/MARK. Make your changes and press ENTER/MARK when done. After entering andconfirming your changes, highlight ‘OK’ and press ENTER/MARK.Creating a map waypoint from non-map item.