Garmin 2610/2650 Owner's Manual

Contents

Garmin 2610/2650 Owner's Manual Manual pdf 81 page image

Appendix71The StreetPilot 2610/2650 uses an on-screen message system to notify you of important information.To acknowledge a message, press IN on the remote’s thumbstick or simply touch the message on thetouchscreen.Data Transfer Complete – Transfer of data to the unit from the PC software has been completed.Database Error – A waypoint or route failed to store in memory. If the problem persists, return the unit toGarmin for service.Map Storage Error – Error with data on the CF card. Try reloading the maps.Map Storage Error: Bad Format – Unrecognized data on the CF card. Return for repair.Map Storage Error: Too Many Maps – The CF card contains more maps than the unit software canprocess. Not all maps on disk will be shown.Detail Maps Don’t Support Routing – Maps that are loaded on the CF card do not support automaticroute calculation.GPS Turned Off for Indoor Use – GPS satellite reception has been disabled for indoor use.Lost Position Confidence – (2650 Only) Unit has been running on DR (Dead Reckoning) too longwithout GPS position. Make sure the antenna has a clear view of the sky.Lost Satellite Reception - The unit has lost satellite signals. Check antenna connections or try moving itto a location with a clear view of the sky.Memory is Full – The unit’s memory is full. To reduce the amount of memory used, delete unused routes,waypoints, or track log data.Route Data Transfer Complete – Route data has successfully been transferred to the unit.Route Memory is Full – Route memory is full and no more routes can be saved or added (from anotherGPS unit or a PC).Route Truncated – The route has been truncated because it was too long. There are turns missing prior tothe destination.Appendix F: Messages