Garmin 2610/2650 Owner's Manual

Contents

Garmin 2610/2650 Owner's Manual Manual pdf 14 page image

Introduction4QUIT PAGEFIND MENUIN OUTROUTE SPEAK1 ABC2 DEF3GHI4JKL5MNO6PQRS7TUV8WXYZ90ZOOMRemote UsageUsing the TouchscreenThe StreetPilot 2610/2650’s touchscreen features allow you to make menu selections, position the mappointer, scroll through menu selections, and enter data with the touch of your finger.To use the touchscreen control, touch the desired object on the screen with your finger, applying just enoughpressure to activate the function. It is not necessary to apply excessive pressure to the touchscreen. Ifthe Touchscreen Tone setting is set to ON, you will hear a click from the speaker with every finger press. If yousense that the touchscreen is not responding properly, it may need to be calibrated.Calibrating the TouchscreenTo calibrate the touchscreen:1. Press the remote or unit MENU key. Select ‘Display.’2. Press the remote or unit FIND key to begin calibration. Follow the on-screen instructions.Using the Remote ControlThe StreetPilot 2610/2650’s alphanumeric remote control allows you to perform functions similar to theunit’s keypad controls. You will notice only subtle differences between the two. As on the keypad, the remotecontrol features PAGE, MENU, FIND, and SPEAK keys. Thus, you can use them the same way you use thekeypad. Similarly, press and hold each key in order to use each key’s secondary function (MARK, ROUTE,RECENT, and VOLUME).The remote differs from the keypad in that it has additional function keys that allow you to quickly enterdata and perform other operations on the unit:• (ZOOM) IN Key — Zooms in to adjust the Map page scale to show a smaller area with more detail.• (ZOOM) OUT Key — Zooms out to adjust the Map page scale to show a larger area with less detail.• QUIT Key — Returns the display to your previous page (much like the “Back” button on an Internetbrowser window). Also, when you are entering data, pressing QUIT restores the previous value(cancels data entry.)• ROUTE Key— Displays a menu of available route navigation features.IR windowthumb stickTo disable the remote(the IR port), pressMENU and select‘Options.’ Select the‘General’ tab andpress the MENUkey. Select ‘DisableRemote.’To enable the remoteagain, press MENUand select ‘Options.’Select the ‘General’tab and press theMENU key. Select‘Enable Remote.’