Vers. No. 6.1102 Released: 25/04/20175 Configuration → Installing the test.commanderTipAt many points in the programs you can call the setting dialogs orsettings via the context menu of an entry. You call the contextmenu with the right mouse key.5.1 Installing the test.commander➡ We recommend that you close all open programs before theinstallation.Insert the Gantner CD into your CD drive. In the standard config-uration Windows opens the CD automatically and a start windowappears. If you have deactivated the Windows autostart function,find the file StartUp.exe in the main directory on the CD and givethe corresponding symbol a double click to obtain the start win-dow. Alternatively, you can also start the program Setup.exe inthe folder test.commander to carry out the installation directly.➡ The program ICP 100 is installed together with the programtest.commander.You will also find the relevant latest versions of the programs onour home page www.gantner-instruments.com via Software >Download.Procedure • Click on the symbol over Load software.• Click on the symbol next to the program which youwant to install.The program Setup.exe is started.• Allow the file to open so that the installation can start.The starting dialog of the setup program appears.• Follow the instructions of the setup program to define theinstallation directory and the program group for the software.Setup.exe creates the directory you have specified, if neces-sary and then copies all files to it.When the program test.commander is started for the first time,you specify the language for the program user interface (you canchange your selection at any time via Extras > Settings > Lan-guage).Then enter your license data via Help > Info and Licensing. Ifyou have licensed the program test.commander, then the pro-gram ICP 100 is also enabled and a further license is notrequired.
