Gaggenau RW 464 Installation Instruction

Also see for RF 411: Installation instruction Installation instruction Installation instructions Installation instructions Installation instruction

Contents

Gaggenau RW 464 Installation Instruction Manual pdf 19 page image

193. Switching the appliance on for thefirst timeThe appliance should now be switched on for the first timein order to ensure the accuracy of the following mountingsteps and with it, the appearance of the entire kitchenfrontage.1. Open the appliance door.2. Actuate the appliance’s On/Off button.Only for appliances with a water connection:In the case of possible damage of the water mains, keepthe shut-off tap closed in order to avoid the risk of damagefrom water coming out.4. Preparing the furniture doorsImportant note:When working on the furniture doors, care should be takento the following:– Always carry out screwing jobs on the most stable partof the furniture door. Never screw into fillings or similarareas.– Always selects screws with a length smaller than thethickness of the cabinet front.– Protect the surfaces of the furniture doors duringinstallation against damage.The overall weight of the furniture door including the handleshould not exceed the following values:* Wine storage compartmentInstead of one large door, two furniture doors can bemounted next to each other in the case of appliances witha width of 76 and 91 cm. These furniture doors are thenconnected using a metal strip on the rear.This metal strip is available from your dealer as aninstallation accessory (Connection element for furnituredoors). For further information see section “Tools andAccessories which are needed”.Note:The instructions for carrying out this work step can befound in the separate installation instructions for thisaccessory.Important information for furniture doors with cutout(appliances with ice and water dispenser, wine storagecabinets):The cut edges of the door cutout must be protected beforehumidity penetrates. To do this, use the means suitablefor the material and the shape of the furniture door(e.g. edge veneer, edge sealant).5. Loading the appliance doorWhen attaching the furniture doors it is recommended toload the storage sections in the door with weights in orderto ensure that the when adjusting crack dimensions turnout to be as precise as possible.Loading recommendations:Appliance width Overall width of the furniture door45.1 cm 20 kg (8.5 kg *)60.3 cm 25 kg (14.5 kg *)75.6 cm 29 kgAppliance width Loading of the appliance door45.1 cm 10 kg60.3 cm 15 kg75.6 cm 20 kg