Gaggenau RW 464 Installation Instruction

Also see for RF 411: Installation instruction Installation instruction Installation instructions Installation instructions Installation instruction

Contents

Gaggenau RW 464 Installation Instruction Manual pdf 18 page image

181. Fastening the plinth stripNote:Never cover the ventilation cracks in the base panelling.Risk of damage to the appliance.Nominal dimensions to be observed:1. Where necessary, cut the base strip to the requiredlength.2. Place base cover on the appliance (do not screw on).3. Take the protective film off from the adhesive pads onthe Velcro strip.4. Put the base strip onto the base panelling and pushfirmly.5. Base strip can be screwed to the base cover frombehind. There are holes in the base cover for thispurpose.2. Aligning the base cover1. Place base cover on the appliance (do not screw on).2. Measure the difference in depth A between the basepanelling and the base strip of the adjacent lowercabinets.3. Remove the base panelling again.4. Adjust the brackets (a) to the dimensions A andtighten.5. Fasten the base panelling.