GE Profile JS998SHSS Owner's Manual

Also see for JS998 Series: Owner's manual Installation instructions Owner's manual Owner's manual Owner's manual

Control PanelIf desired, the touch pads may be deactivatedbefore cleaning.See the Control lockout information in theUsing the clock, timer and control lockoutsection in this manual.Clean up splatters with a damp cloth.You may also use a glass cleaner or thecooktop cream.Remove heavier soil with warm soapywater. Do not use abrasives of any kind.Reactivate the touch pads after cleaning.Care and cleaning of the range.Be sure all controls are off and all surfaces are cool before cleaning any part of the range.Control KnobsThe control knobs may be removed for easiercleaning.Before removing the knobs forcleaning, please note that the knobs arein the OFF position. When replacing theknobs, check the OFF position to insureproper placement.Wash the knobs in soap and water or avinegar and hot water solution but donot soak.How to Remove Packaging TapeTo assure no damage is done to the finishof the product, the safest way to removethe adhesive left from packaging tapeand cooktop labels on new appliancesis an application of a household liquiddishwashing detergent, mineral oil orcooking oil.Apply with a soft cloth and allow to soak.Wipe dry and then apply an appliancepolish to thoroughly clean and protectthe surface.NOTE: The adhesive must be removed from allparts. It cannot be removed if it is baked on.If your range is removed for cleaning, servicing or any reason, be sure the anti-tipdevice is re-engaged properly when the range is replaced. Failure to take thisprecaution could result in tipping of the range and cause injury.Oven VentThe oven vent is above the left side of the door.This area could become hot duringoven use.It is normal for steam to come out ofthe vent.The vent is important for proper air circulation.Never block this vent.42Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions