Chapter 4: TroubleshootingService Mode4-4 Service Manual** The Low saturation limit can be set only between 20 and the High saturation limit –1.The High saturation limit can be set only between the Low saturation limit +1 and 100.The Operation Settings menu screen appears as follows:4.1.5 Scale CalibrationThis menu displays the Scale Recalibration Count (SR) and Corrected value (SC). It also displays Scalesoftware revision, model, resolution code and POST (power on self test) results.Note: For versions of Application Software 1.0.9 and earlier SR represents Scale Raw Value.Menu selections:• Manual Cal (refer to “3 Calibration” for details).• Check Weight. Used to verify the correct weight is reported once calibration is complete.
