GE Multilin F60 Feeder Protection System 6-76 ACTUAL VALUES 6.2 STATUS66.2.9 DIGITAL COUNTERSPATH: ACTUAL VALUES Ö STATUS ÖØ DIGITAL COUNTERS Ö DIGITAL COUNTERS Counter 1(8)The present status of the eight digital counters is shown here. The status of each counter, with the user-defined countername, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date andtime stamp for the frozen count. The COUNTER 1 MICROS value refers to the microsecond portion of the time stamp.6.2.10 SELECTOR SWITCHESPATH: ACTUAL VALUES Ö STATUS ÖØ SELECTOR SWITCHESThe display shows both the current position and the full range. The current position only (an integer from 0 through 7) is theactual value.6.2.11 FLEX STATESPATH: ACTUAL VALUES Ö STATUS ÖØ FLEX STATESThere are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.6.2.12 ETHERNETPATH: ACTUAL VALUES Ö STATUS ÖØ ETHERNETThese values indicate the status of the primary and secondary Ethernet links. DIGITAL COUNTERS Counter 1Counter 1 ACCUM:0MESSAGE Counter 1 FROZEN:0MESSAGE Counter 1 FROZEN:YYYY/MM/DD HH:MM:SSMESSAGE Counter 1 MICROS:0 SELECTOR SWITCHESSELECTOR SWITCH 1POSITION: 0/7Range: Current Position / 7MESSAGE SELECTOR SWITCH 2POSITION: 0/7Range: Current Position / 7 FLEX STATESPARAM 1: OffOffRange: Off, OnMESSAGE PARAM 2: OffOffRange: Off, On↓MESSAGE PARAM 256: OffOffRange: Off, On ETHERNETETHERNET PRI LINKSTATUS: OKRange: Fail, OKMESSAGE ETHERNET SEC LINKSTATUS: OKRange: Fail, OK
