8-10 F60 Feeder Protection System GE Multilin8.2 SETTINGS SECURITY 8 SECURITY84. Verify one more time that you wish to remove the template by clicking Yes.The EnerVista software will remove all template information and all settings will be available.8.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONSThe UR allows users to secure parts or all of a FlexLogic™ equation, preventing unauthorized viewing or modification ofcritical FlexLogic™ applications. This is accomplished using the settings template feature to lock individual entries withinFlexLogic™ equations.Secured FlexLogic™ equations will remain secure when files are sent to and retrieved from any UR-series device.a) LOCKING FLEXLOGIC™ EQUATION ENTRIESThe following procedure describes how to lock individual entries of a FlexLogic™ equation.1. Right-click the settings file or online device and select the Template Mode > Create Template item to enable the set-tings template feature.2. Select the FlexLogic > FlexLogic Equation Editor settings menu item.By default, all FlexLogic™ entries are specified as viewable and displayed against a yellow background. The icon onthe upper right of the window will also indicate that EnerVista UR Setup is in EDIT mode.3. Specify which entries to lock by clicking on them.The locked entries will be displayed against a grey background as shown in the example below.Figure 8–7: LOCKING FLEXLOGIC™ ENTRIES IN EDIT MODE4. Click on Save to save and apply changes to the settings template.5. Select the Template Mode > View In Template Mode option to view the template.6. Apply a password to the template then click OK to secure the FlexLogic™ equation.
