6-32 F60 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUALPRODUCT INFORMATION CHAPTER 6: ACTUAL VALUES6The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.The rear panel on the device contains similar information.ETHERNET MAC ADDRESS — UR devices with firmware 7.0x and above have three Ethernet ports that can be used on threenetworks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is onehigher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.6.6.2 Firmware revisionsACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONSThe shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have beeninstalled. FIRMWARE REVISIONS F60 RelayREVISION: 7.4xRange: 0.00 to 655.35Revision number of the application firmware. MODIFICATION FILENUMBER: 0Range: 0 to 65535 (ID of the MOD FILE)Value is 0 for each standard firmware release. BOOT PROGRAMREVISION: 7.01Range: 0.00 to 655.35Revision number of the boot program firmware. FRONT PANEL PROGRAMREVISION: 2.01Range: 0.00 to 655.35Revision number of faceplate program firmware. COMPILE DATE:2016/09/15 04:55:16Range: YYYY/MM/DD HH:MM:SSDate and time when product firmware was built. BOOT DATE:2013/09/15 16:41:32Range: YYYY/MM/DD HH:MM:SSDate and time when the boot program was built. FPGA PROGRAMREVISION: 02.02Range: 0.00 to 655.35Revision number for FPGA. FPGA DATE:2016/09/15 16:41:32Range: YYYY/MM/DD HH:MM:SSDate and time when the FPGA was built.
