GCC Technologies 21 Series User Manual

Contents

GCC Technologies 21 Series User Manual Manual pdf 153 page image

6-85. PrintingThis menu controls items related to print quality. Items can be changed by usingthe Value key and pressing Select to confirm the change. The items are asfollows:• Copies: Controls the default number of copies of a document that are printedif no number is specified within the print job. Default is 1 copy, this value canbe set from 1 to 999.• Default Size: Specifies the default paper size used if no paper size isspecified in the print job. Default is US Letter (110V models) or A4 (220Vmodels).• Append CR to LF: Appends a carriage return to the end of each line of aplain-text PCL job to allow the job to print out with proper formatting. Defaultis Enabled.• Print Errors: Specifies whether the printer will automatically generate adetailed report of any PostScript printer errors. Default is Disabled.6. ConfigurationThis menu controls items related to the way that basic functions of the printer areconfigured. The items are as follows:• Energy Save: Controls amount of time that the printer will remain idle beforeswitching to Energy Save mode. Default is 15 minutes.• Collation Mode*: Sets whether collation is handled by the printer or by thecomputer. If Disabled, the printer driver on the computer will send the jobonce for each collated copy. If Enabled, the driver will send the job once andthe printer will hold the job in memory and generate subsequent copiesautomatically. This mode is faster, but takes up more memory.• RAM Disk (MB)*: Allows a portion of the printer’s RAM to be set aside as aRAM Disk. This area can store often-used fonts, held jobs, etc. to speed upprocessing time. This reduces the amount of available processing RAM,however, and is only recommended in cases where the printer’s RAM hasbeen upgraded. Default is Disabled.• Hold Last Job*: Sets the Held Job feature described under the Held Jobmenu (see #1) to Enabled or Disabled.