Operating Manual - EnglishPRIMERGY BX920 S4Server BladeOperating ManualNovember 2013

Fujitsu PRIMERGY BX920 S4 Operating Manual

server blade

copyright and trademarks

version history

Introduction

Notational conventions

Before you start

Classification of procedures

Upgrade and Repair Units (URU)

Field Replaceable Units (FRU)

Average task duration

Tools you need at hand

Documents you need at hand

Important information

CE conformity

FCC Class A Compliance Statement

Environmental protection

Basic hardware procedures

Locating the defective server blade

Determining the error class

Global Error indicator

Customer Self Service (CSS) indicator

Locating the defective component

component leds

Opening the rack door

Shutting down the server blade

Removing a server blade

Removing the server blade from the system unit

Opening the server blade

Closing the server blade

Installing the server blade in the system unit

Switching on the server blade

Concluding software tasks

Closing the rack door

Basic software procedures

Checking the server blade status via iRMC

Saving BIOS settings

Disabling BitLocker functionality

Disabling boot watchdog functionality

Verifying and configuring the backup software solution

Note on server maintenance in a Multipath I/O environment

Switching on the ID indicator

Completing the maintenance task

Updating or recovering the iRMC

Restoring BIOS settings

Enabling Option ROM scan

Resetting the boot retry counter

Enabling boot watchdog functionality

Enabling replaced components in the system BIOS

Verifying the system time settings

Viewing and clearing the System Event Log (SEL)

Saving the SEL

Clearing the SEL

Enabling BitLocker functionality

Performing a RAID array rebuild

Looking up WWN addresses

Using the Chassis ID Prom Tool

After replacing the server blade

Hard disk drives / solid state drives

Basic information

General equipping rules

Installing a 2.5-inch HDD/SSD module

Installing the 2.5-inch HDD/SSD module

Concluding steps

Removing a 2.5-inch HDD/SSD module

Removing the 2.5-inch HDD/SSD module

Installing the 2.5-inch dummy module

Replacing a 2.5-inch HDD/SSD module

Preliminary steps

Replacing HDD/SSD backplanes

Removing the HDD/SSD backplane

Installing the HDD/SSD backplane

Expansion cards and backup units

Mezzanine cards

Installing riser cards

Removing riser cards

Population rules for mezzanine cards

expansion cards and backup units

Installing mezzanine cards

Installing a mezzanine card

Removing mezzanine cards

Removing a mezzanine card

Replacing mezzanine cards

SAS RAID HDD module

Installing the SAS RAID HDD module

Primergy BX920 S4

Fujitsu PRIMERGY BX920 S4 Operating Manual

Product

Learn More

Legal