Menu
Fujitsu PRIMERGY BX920 S4 Operating Manual
Also see for Primergy BX920 S4: Upgrade and maintenance manual
                                                                  |
48 Operating Manual BX920 S4Starting up and operationControl elementsLEDs on the control panelOn/Off buttonWhen the server blade is switched off, it can be switched on againby pressing the On/Off button.When the server blade is operating, pressing the On/Off button willswitch off the server blade .V CAUTION!Risk of loss of data!I The On/Off button does not disconnect the server blade fromthe mains voltage. To disconnect it from the mainscompletely, remove it from the system unit.ID ID buttonLights up (blue) on the front of the server blade when the ID buttonis pressed.If the ID button is pressed for more than 5 seconds, released andpressed again within 1 second, an NMI is issued.Power indicator (three-color)Does not light up if no line voltage is present.Lights orange when the server is switched off but line voltage ispresent.Lights yellow to indicate a power supply error.Lights up green when the server is switched on.Flashes green when the server has been switched on and is instandby mode. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved