Fujitsu M10 Product Notes

Also see for M10 Series: Installation guide Installation guide Installation planning manual Product notes

Contents

Table 3-5 Problems that might occur with XCP 2240 and workarounds (continued)SPARC M10-RTI No. 1 4 4S Description WorkaroundinformationXSCF> showsmtpMail Server:Port: 25Authentication Mechanism: noneReply Address:- E-mail notification function setting[Example] To display the e-mail reportsetting informationXSCF> showemailreportE-Mail Reporting: disabled4. Execute the restoreconfig(8) commandto restore the XSCF setting information.5. After restoring the XSCF settinginformation with the restoreconfig(8)command, execute the command belowto implement a reset using the settingvalues confirmed in step 1. Or, initializethe time difference.- Restoring setting for power operationat power recovery[Example] Not powering on at powerrecoveryXSCF> setpowerschedule -a -crecover=off- Restoring ASR function (Service Tag)enable/disable setting[Example] Setting to enableXSCF> setservicetag -c enable- Restoring PPAR DR featureenable/disable setting[Example] Setting to disableXSCF> setpparmode -p 0 -m ppar_dr=off- Restoring configuration and settingchanges of power supply interlockinggroup and enable/disable setting ofpower supply interlocking function[Example] Restoring setting informationbased on management file saved to FTPserverXSCF> setremotepwrmgmt -c config"ftp://server[:port]/path/file"[Example] Enabled when savingXSCF> setremotepwrmgmt -c enable- Initializing time difference betweenXSCF and hypervisor of each PPARChapter 3 Information on Software 61