Epson PowerLite 1725 Quick Setup Manual

Also see for 1735W - PowerLite WXGA LCD Projector: User guide User manual Operation guide Product support bulletin Product support bulletin

Contents

PowerLite®1725/1735WQuick Setup1 Turn On Your EquipmentBefore using the projector, make sure you read the safety instructions in theUser’s Guide on your projector CD.1 Connect the power cord to the back of the projector and plug the otherend into an electrical outlet.2 Open the A/V Mute slide (lens cover). Make sure the slide isopened completely.3 Remove the battery cover on the remote control. Locate the two AAbatteries that came with the projector and insert them. Then replacethe battery cover.4 To turn the projector on, press the Power button on the projectoror the remote control. The projector beeps once, and the projector’sPower light flashes green and then stays on.To shut down the projector, press the Power button twice and simplyunplug it. You don’t have to wait for the projector to cool off.1 To raise the image,press the foot releasebutton for the frontadjustable foot and liftthe front. Release thebutton to lock the footin position.2 Adjust the ImagePower buttonPower light*411482900**411482900*

/ 4

Related manuals for Epson 1735W - PowerLite WXGA LCD Projector